[Mac-telephony-list] Does anyone have any experience conecting asterisk/openPBX to a PRI ?

[Ken Rice via List]

Mark contact me off list, but this is right up my alley

Ken at asteriasgi dot nospam dot com

(loose the no spam)

We can discuss your options on this.

K


On 12/19/06 9:13 PM, "Mark Engelhardt via List"
<mac-telephony-list at mactelephony.net> wrote:

> Hello,
> 
> We are considering deploying the following setup:
> 
> G5 Xserver running openPBX RC2
> 25 Cisco 7960 IP phones
> 10 Cisco 7912 IP Phones
> 1  Cisco 2600 router with a High Density Voice Module (NM-HDV)
> installed connected to a Telco PRI.
> 
> The above system would replace 13 copper pair analog lines connected
> to an Avaya Magix system.
> 
> Questions:
>   1) Does anyone have experience with this kind of setup?
>   2) Is the cisco High Density Voice Module (NM-HDV) recommended for
> this?
>   3) What other PRI gateway do you recommend?
>   4) Are you available for hire to help configure this setup in mid-
> january?
>      You can reply to the above question off list:  marke at
> smalldog.com
>   5) Should I scrap the mac idea and run asterisk with a Digium
> Wildcard TE110P on a PC linux box.?
> 
> Mark Engelhardt
> 
> 
>   .
> 
> 
> 
> 
> 
> 
> 
> 
> _______________________________________________
> mac-telephony-list mailing list
> mac-telephony-list at mactelephony.net
> http://lists.mactelephony.net/mailman/listinfo/mac-telephony-list