[Mac-telephony-list] Neebee question

[Ivan C Myrvold via List]

You have to configure your soft phone in sip.conf with an extension  
number and secret (password). And then you have to make the soft  
phone to register itself with this extension number and secret.

Ivan

Den 25. nov. 2006 kl. 17.39 skrev Dennis Dunbar via List:

> Thanks to a couple people on the old Astmaster list I got my iMac
> Asterisk up and running fine.  Now I just tried to use a soft phone
> at a remote location and the Asterisk didn't see it.  I though I
> would just have to put in my IP, configure port 5060 etc.  No go.  I
> have a FQDN going to the IP where the Asterisk is so I tried that no
> go.  I have good service in and out using VBuzzer and t38 out fax
> using Gafachi.  I really wanted to access my VBuzzer from a remote
> soft phone via Asterisk.
>
> What am I missing.
>
> Thank you in advance.
> _______________________________________________
> mac-telephony-list mailing list
> mac-telephony-list at mactelephony.net
> http://lists.mactelephony.net/mailman/listinfo/mac-telephony-list
>