[Mac-telephony-list] Neebee question

[Dennis Dunbar via List]

when im on my lan the soft phone registers ( I chose extention 120 )   
and no password.

when I go on the internet i enter the IP for the location of the  
asterisk ( it is back of a linksys) but the asterisk doesnt seem to  
see the soft phone.  I tried forcing the IP with a port number etc.

Are you saying I must use a password?


On Nov 26, 2006, at 11:03 AM, Ivan C Myrvold via List wrote:

> You have to configure your soft phone in sip.conf with an extension
> number and secret (password). And then you have to make the soft
> phone to register itself with this extension number and secret.
>
> Ivan
>
> Den 25. nov. 2006 kl. 17.39 skrev Dennis Dunbar via List:
>
>> Thanks to a couple people on the old Astmaster list I got my iMac
>> Asterisk up and running fine.  Now I just tried to use a soft phone
>> at a remote location and the Asterisk didn't see it.  I though I
>> would just have to put in my IP, configure port 5060 etc.  No go.  I
>> have a FQDN going to the IP where the Asterisk is so I tried that no
>> go.  I have good service in and out using VBuzzer and t38 out fax
>> using Gafachi.  I really wanted to access my VBuzzer from a remote
>> soft phone via Asterisk.
>>
>> What am I missing.
>>
>> Thank you in advance.
>> _______________________________________________
>> mac-telephony-list mailing list
>> mac-telephony-list at mactelephony.net
>> http://lists.mactelephony.net/mailman/listinfo/mac-telephony-list
>>
>
> _______________________________________________
> mac-telephony-list mailing list
> mac-telephony-list at mactelephony.net
> http://lists.mactelephony.net/mailman/listinfo/mac-telephony-list